News — New CV joint

Drive Shaft Nissan Qashqai Reconditioned Driveshaft CV Joint (Constant Velocity Joint) What causes the drive shaft to break? If you overload the vehicle or work with excess weight on it, then it can cause the driveshaft to break. The drive shaft should be handled by professionals like us when replacing worn-out parts such as the bearings, universal joints, and seals. When installed incorrectly, the new parts also could break the shaft. Driveshaft and steering rack specialist since 1980 www.singspareparts.sg Freddy Lim +65 8013 9793 http://wa.me/80139793 www.singspareparts.sg The only company in Singapore with more than 40 years of experience

Drive Shaft Nissan Latio Reconditioned Driveshaft CV Joint (Constant Velocity Joint) What would cause a drive shaft to break? Road hazards or tire lifts can injure your drive shaft. Once the damage is done, replace the tube. This might have been caused by a defective weld or even by inconsistent properties in the tube which is why it is recommended to get your drive shaft replaced at Sing Spare Parts Co.  Driveshaft and steering rack specialist since 1980 www.singspareparts.sg Freddy Lim +65 8013 9793 http://wa.me/80139793 www.singspareparts.sg The only company in Singapore with more than 40 years of experience

Drive Shaft Honda Stream RN6 Reconditioned Driveshaft CV Joint (Constant Velocity Joint) What happens if you choose the wrong drive shaft length? Drive shaft length is very important. The function of the slip yoke is to compensate for suspension movement. A shaft that is too long can bottom-out the slip yoke in the trans, causing damage. A shaft that is too short doesn’t provide the yokes needed support and has potential to bind.  Having a hard time in determining which one is the right one for your car? We got you covered! Get your drive shaft to be replaced or...

Drive Shaft Toyota Picnic Reconditioned Driveshaft CV Joint (Constant Velocity Joint) An unbalanced driveshaft causes a vibration that increases with vehicle speed. The driveshaft can become damaged or dented. Undercoating, mud, or a missing balance weight cause the driveshaft to spin out of balance. It results in a vibration that increases with vehicle speed. Driveshaft and steering rack specialist since 1980 www.singspareparts.sg Freddy Lim +65 8013 9793 http://wa.me/80139793 www.singspareparts.sg The only company in Singapore with more than 40 years of experience

Drive Shaft Hyundai I45 Reconditioned Driveshaft CV Joint (Constant Velocity Joint) What is the difference between axle and shaft?  The shaft is used for rotary motion while the axle is used for linear or angular motion. The shaft is used to transmit power at a short distance while the axle transmits power at long distance. The shaft can be meant for balancing or transferring torque while the axle is meant for balancing or transferring bending moment. Before it happens, get them fixed at Sing Spare Parts Co.  Driveshaft and steering rack specialist since 1980 www.singspareparts.sg Freddy Lim +65 8013 9793...